1. Forum
  2. USENET
  3. alt.ham-radio.ssb

  • AT 120 not tuning below 11MHz

    From Jerros@jerros_2000@yahoo.co.uk to alt.ham-radio.ssb on Sun Mar 23 18:05:22 2008
    From Newsgroup: alt.ham-radio.ssb

    I have an Icom 725 radio and an AT 120 tuner on a sailboat. I cannot tune
    below 11 MHz at all and have no RF output. Above 11 MHz I can tune and and
    have made contact with a winlink station via Pactor IIE modem although my ammeter only registered using about 2 amps.

    --
    Message posted using http://www.talkaboutradio.com/group/alt.ham-radio.ssb/ More information at http://www.talkaboutradio.com/faq.html

    --- Synchronet 3.21b-Linux NewsLink 1.2
  • From Stanley Miln@k6rmr@dslextreme.com to alt.ham-radio.ssb on Thu Sep 25 12:33:19 2008
    From Newsgroup: alt.ham-radio.ssb

    If I recall, It has been 15 years since I had a Kenwood
    AT 120 tuner , But I think they are only suppose to
    to tune the Ham bands from 10 to 80 Meters.
    Also AT120 tuner is not a wire tuner , it is suppose
    to tune a 50 Ohm coax line.
    Stan
    "Jerros" <jerros_2000@yahoo.co.uk> wrote in message news:5b1f7eb974cab6f4a57b02a25d121ec9@localhost.talkaboutradio.com...
    I have an Icom 725 radio and an AT 120 tuner on a sailboat. I cannot tune
    below 11 MHz at all and have no RF output. Above 11 MHz I can tune and and have made contact with a winlink station via Pactor IIE modem although my ammeter only registered using about 2 amps.

    --
    Message posted using
    http://www.talkaboutradio.com/group/alt.ham-radio.ssb/
    More information at http://www.talkaboutradio.com/faq.html



    --- Synchronet 3.21b-Linux NewsLink 1.2
  • From Stanley Miln@k6rmr@dslextreme.com to alt.ham-radio.ssb on Tue Jun 16 10:34:39 2009
    From Newsgroup: alt.ham-radio.ssb

    If you are talking about the Kenwood AT120 tuner that is a 50 ohm
    coax tuner not a radom wire tuner.
    Stan
    "Jerros" <jerros_2000@yahoo.co.uk> wrote in message news:5b1f7eb974cabuner]]6f4a57b02a25d121ec9@localhost.talkaboutradio.com...
    I have an Icom 725 radio and an AT 120 tuner on a sailboat. I cannot tune
    below 11 MHz at all and have no RF output. Above 11 MHz I can tune and and have made contact with a winlink station via Pactor IIE modem although my ammeter only registered using about 2 amps.

    --
    Message posted using
    http://www.talkaboutradio.com/group/alt.ham-radio.ssb/
    More information at http://www.talkaboutradio.com/faq.html



    --- Synchronet 3.21b-Linux NewsLink 1.2