A 3D printed drone is probably the world's fastest DIY plane ever, quicker
than even the legendary P38 Lightning but at 408mph, it has some way to go
to catch up with the 575mph TU-95

Date:
Sat, 17 Jan 2026 09:00:00 +0000

Description:
A fully 3D printed drone reaches 408mph and retakes the Guinness World Record for fastest quadcopter ever flown by a DIY team.

FULL STORY

A fully 3D printed quadcopter has set a new speed benchmark for DIY aircraft, reaching 408mph during verified test flights.

The drone, called Peregreen V4, was built and flown by engineer and YouTuber Luke Maximo Bell with his father.

At that speed it is probably the worlds fastest DIY plane ever, faster than
the P38 Lightning at around 414mph, although it still trails the Tu-95s
roughly 575mph figure. A new Guinness World Record

The speed was recorded as part of an official attempt overseen by Guinness World Records, using a two run average to account for wind conditions.

The fastest downwind run reached 659km/h (410mph), while the fastest upwind pass recorded 599km/h (372mph), producing a verified average of 657km/h (408mph). That performance places the drone ahead of its immediate competitors in the DIY category, reclaiming the record from Australian engineer Ben Biggs.

Biggs had previously set a 626km/h record with his Blackbird drone, briefly taking the title from the Bell team.

The Peregreen V4 project took more than two years and relied heavily on computational fluid dynamics simulations and repeated flight testing.
Its airframe was printed as a single continuous piece using multiple
materials, including PETG, PA6-CF, and TPU.

Bell said: "The new printers larger build volume and dual-nozzle system made
it possible to print the body as one continuous piece. That gave us smoother aerodynamics and a much higher surface finish quality than before."

Three different motor designs were evaluated before the team settled on the T-Motor 3120, prioritizing temperature stability over peak thrust.
The chosen motors were modified from 800KV to 900KV to allow higher
rotational speeds and improved top-end performance.

Aerodynamic refinements also included sanding and polishing the body and trimming propellers from 7x5in to roughly 6in.

Although exceptionally fast for a quadcopter, Bell has suggested the record
is unlikely to stand for long, and development work on future versions is already well underway.

Should you wish to make your own drone and try to take the record for
yourself, we can only wish you good luck, and suggest you take a look at our round up of the best 3D printers to get you started (see article link
below).

Via Tom's Hardware

======================================================================
Link to news story: https://www.techradar.com/pro/a-3d-printed-drone-is-probably-the-worlds-fastes t-diy-plane-ever-quicker-than-even-the-legendary-p38-lightning-but-at-408mph-i t-has-some-way-to-go-to-catch-up-with-the-575mph-tu-95

$$
--- SBBSecho 3.28-Linux
* Origin: Capitol City Online (42:17/1)